Description
The Rennie Grapnel is usually used in conjuntion with the Gifford. The Rennie Grapnel is built up of flat links, the fluke passes through the body and is then welded onto it. The links are joined together in sets of four in the form of a chain, successive links and flukes being at right angles to each other. Flukes can be detached for renewal when required.
It is often used with two Gifford grapnels to provide weight and hold the grapnels down. The Rennie Grapnel can be used on any type of seabed but originally designed for rocky environments.
Key features
- Manufactured from high strength structural steel
- Painted using marine grade paint
- Proof Loaded to 150% of WLL
- Optional Hardox flukes
Applications
- PLGR (Pre Lay Grapnel Run)
- Originally designed for rocky environments
- Recovering or clearing cables up to 90mm diameter
- Maintenance of cable systems
Dimensional data
| Part Number | Description | A | B | C | D | WLL | Proof Load |
|---|---|---|---|---|---|---|---|
| 0001-1159 | Rennie Large | 2358mm | 660mm | 395mm | 438mm | 13t | 26t |
Spares and Accessories
| Part Number | Description |
|---|---|
| 0050-1095 | 26mm Hammer Lok Coupling |